Saber Foundation Repair Before & After Photos
Click on a photo to enlarge.
Seismic Retrofitting For Your Crawlspace Using Supported Posts In Los Angeles, CA
The before photo shows a home in LA that had a massive issue with sagging floors because there are not any posts in the middle of the crawlspace to support the floor joists. The after photo shows how we installed proper support posts to address the problem area to prevent the floor from sagging.
Restoring Stability to a 1920s Home in Los Angeles, Ca
The homeowner had lived in her 1920s Los Angeles home for over 20 years, but shortly after moving in, she noticed problems—sticking doors, windows that wouldn't open, and bouncy floors. Over time, these issues worsened as the home’s foundation began to fail due to aging wooden posts in the crawlspace.
To restore stability, we replaced the deteriorating 4x4 wood posts with new ones, installed a metal supplemental beam, and added SmartJack® adjustable supports to lift and secure the sagging floors. These adjustments provided the reinforcement her home desperately needed.
With the new supports in place, the homeowner’s floors are now level and solid, and her doors and windows operate smoothly once again. The SmartJack® system and structural repairs ensured long-term stability, giving the homeowner peace of mind.
Using PolyLevel® & Nexus Pro® To Fix Concrete Stairs In Los Angeles, CA
In the before photo, you can see that the concrete stairs located in the back patio in a Los Angeles home has an enormous crack. This is from voids underneath where the concrete was poured. The concrete has settled in the void and has caused the concrete to be uneven and cracked. The after photo shows the final result after the concrete was stabilized by our PolyLevel solutions paired with our state-of-the-art NexusPro Sealant.
Installing a Helical Pier in Los Angeles
The Before Picture shows the Excavated Hole to expose this Home Foundation.
The After Picture shows the Torqued Helical Post, that is being Pressurized. The excess Post will be Removed, so that this pier can be covered with dirt.
Pier Installation - Los Angeles
This home in Los Angeles, California, was showing serious signs of settlement issues. Saber was contracted to fix the foundation. The push pier system was used to compete the job. In these photos you can see the pier set up for the lift of the property and then once the lift is complete and the hoses are removed the pier is not a permeant fixture at the footing of the foundation. Once the void is filled with PolyLEVEL™ the hole will be backfilled and the cleanup will begin and the project will be complete. The homeowner will no longer see the signs of settlement, as the cracks will have closed and the doors and windows that once were hard to open and close, will now open and close with ease.
