Saber Foundation Repair Before & After Photos

The Before Picture shows a swimming pool and deck that are cracked and not usable.

The After Picture shows a Saber crew member excavationg holes for for cement pier stabilization.

The Before Picture shows a driveway that has cracked due to voids forming under it.

The After Picture shows the driveway, that has had the void filled with Polyurethane, by Saber's State-of-the-Art PolyLevel Injection Process.

The before-photo shows a driveway in Anaheim that has severe cracks and settlements from voids. The after-photo shows our two top-of-the-line solutions to solve these types of issues. To fill the voids and lift the concrete we use our PolyLevel solution. After the concrete is stabilized we finish the job off with our sealant NexusPro.

In the quiet neighborhood of Anaheim, CA, a homeowner faced an all-too-common but deeply frustrating issue: the concrete surrounding their home—particularly the driveway and front walkway—was sinking and cracking. What began as a small cosmetic concern quickly turned into a serious safety risk. Water was pooling near the garage during rainstorms, causing slick, hazardous patches. The uneven slabs posed a trip hazard for visiting family members, and the growing cracks gave the property a neglected appearance, undermining its curb appeal and long-term value.

The homeowner tried patching some of the cracks themselves, only to see them reappear a few months later. With each passing season, the problem worsened.

The Search for a Solution

Determined to fix the issue before it caused further damage—or a serious injury—the homeowner began researching options. Traditional mudjacking came up, but the invasive nature and slow curing process were discouraging. DIY sealants from the local hardware store had already failed to withstand Anaheim’s fluctuating weather conditions. What they needed was more than a quick fix—they needed a permanent, professional solution.

Why Saber Foundation Repair?

After reading glowing reviews and learning about Saber Foundation Repair’s expertise in foundation and concrete repair, the homeowner scheduled a free inspection. What stood out was the company’s transparency, professionalism, and science-backed approach. Saber’s team didn’t just offer a quote—they provided a full evaluation, outlining the root causes of the problem: soil erosion beneath the slabs, exacerbated by poor water drainage and unsealed joints.

What sealed the decision was Saber’s use of advanced products like PolyLevel® and NexusPro®, specifically engineered to address these exact issues in Southern California climates.

The Repair Process

The project began with lifting the sunken driveway and walkway using PolyLevel®, a high-density polyurethane foam. Unlike traditional methods, PolyLevel is lightweight, non-invasive, and fast-acting. It was injected through tiny, penny-sized holes in the concrete, expanding beneath the slabs to fill voids and lift the concrete back to its original position. Within just 15 minutes, the surface was safe to walk and drive on again.

Next came NexusPro®, Saber’s long-lasting silicone-based joint and crack sealant. After thoroughly cleaning and preparing the cracks, Saber’s crew applied NexusPro to seal out water and debris, preventing future erosion and movement. Unlike conventional sealants, NexusPro resists UV damage and extreme temperatures—crucial in Anaheim's variable climate.

The entire process was completed in a single day, with minimal disruption to the homeowner’s daily routine.

The Transformation – The After

The results were immediately visible. The driveway was now level and smooth, restoring the home’s curb appeal and eliminating pooling water and trip hazards. The NexusPro joints blended seamlessly into the existing concrete, providing a clean, professional finish that looked as good as it performed.

Beyond aesthetics, the homeowner gained something even more valuable: peace of mind. No more worrying about safety issues or worsening cracks. The property was now protected against further settlement and environmental wear.

The Power of Trust

Concrete and foundation issues don’t fix themselves. Left unchecked, they only get worse—and more expensive. Saber Foundation Repair earned the homeowner’s trust by offering real solutions, not temporary patches. From the first inspection to the final walkthrough, Saber’s team was transparent, informative, and dedicated to quality.

That trust paid off. The homeowner now knows their home is safe, stable, and protected—no shortcuts, no surprises.

A Win for Everyone

Fixing concrete damage isn’t just a repair—it’s an investment. This Anaheim homeowner not only regained their home’s structural integrity but also boosted its property value and market appeal. Saber Foundation Repair continues to help homeowners across Southern California protect their biggest investment: their home.

The Before Picture shows a area being prepared for excavating holes next to the home.

The After Picture shows Polyurethane, after our PolyLevel Injection process. We have also installed a Helical Tieback.