Job Stories

Dana Point resident Dave D. contacted Saber regarding cracks in his patio. Saber's Project Design Specialist performed a complete inspection of Dave's home.  Sabers crew chased the cracks and filled them using the Nexus Pro process. The attached picture shows the finished job. The Nexus Pro is the white material, that is sealing the brick to the concrete trim. Dave was happy with the result.

Dana Point resident Saim T. contacted Saber regarding cracks in the walls and driveway of his home. Our Project Design Specialist located voids during the Free Homeowner inspection. Saber's crew excavated holes next to the Foundation of Saim's home. We then installed Push Piers to the base of the concrete slab. Our crew pressurized the Piers, which lifted the sinking areas of the Foundation. The attached picture shows a installed Push Pier being Pressurized. The Push Piers strengthened and Stabilized the entire Foundation. Saim was happy with the results.

Lisa L. of Green Valley Lake, California, had noticed that the floors in her home were sagging and the walls had begun to bow.  The first step she took was locating a foundation company with a great reputation, to fix her issue.  After doing her research she set up an appointment, with Saber, for an estimate.  The findings were, sagging beams and floor joists caused by weakening of members over time.   Saber scheduled a crew to compete the work for Lisa.  The crew installed galvanized adjustable steel Smart Jacks, by digging a 24x24" foundation pit, created an engineered fill, and installed a precast foundation base, and attached and adjusted the Smart Jack.  The crew also needed to install new 4x6 wood grider beams for additional reinforcement to existing floor supports.  This was accomplished by removing the sub floor to expose the existing beams. The home was lifted to maximum practical recovery, and the sub floor was replaced.  The site was then cleaned and the project was complete. 

Green Valley Lake resident Chuck H contacted Saber regarding sagging floors in his home. Saber's Project Design Specialist performed a Free Homeowner inspection of Chuck's home. The Support Posts in the Crawlspace were slipping off of their bases. Our crew attached wood girder beams to the existing Floor Joists. We then installed all metal SmartJacks with concrete bases. Chuck was happy with the results. No more sagging floors.

Calimesa resident Jackie H contacted Saber regarding trip hazards on her patio. Our Project Design Specialist performed a complete evaluation. Out crew leveled the patio using our PolyLevel process. We also repaired the cracks using Nexus. Jackie was happy with the completed job and clean up. 

Mission Hills resident Alan contacted Saber regarding Seismic Retrofitting his home built in 1953. Saber's Project Design Specialist performed a complete, and Free Homeowner inspection . Our crew attached over one hundred Universal Foundation Plates and A35 Framing Angles. These components have Strengthened Alan's home structure to it's Foundation. The attached picture shows two of these installed units. Alan was very satisfied with the result. He was also pleased with the crew's clean up.

Mission Hills resident Alan Y. contacted Saber regarding Seismic Retrofitting his home, that was built in 1974. He wanted  his home to meet the California Building Code. Saber's crew installed Universal Foundation Plates in the home's Crawlspace. These plates strengthen the connection between the home, and it's foundation. Alan was happy with the finished product. He now has peace of mind regarding his home not sliding off it's foundation in the event of a earthquake.

Nuevo resident Richard B. contacted Saber regarding cracks in the driveway of his home. These cracks were creating Trip Hazards. Our Project Design Specialist performed a Free Homeowner Inspection, and found that voids had formed under Richard's driveway. Saber recommended filling these voids with Polyurethane by using our State-of-the-Art PolyLevel Injection Process. This would lift the sinking areas of concrete and eliminate the trip hazards. Richard received a copy of Saber's Home Inspection Report and our 30 day quote.

Wildomar resident Scott R. contacted Saber regarding a trip hazard in a commonly used area. Our Project Design Specialist performed a complete evaluation. Our crew used our PolyLevel process, to raise the sunken slab, to the same level as the other slabs. Scott was happy with the results and the clean up.

A homeowner in Capistrano Beach, Ca. had been experiencing numerous problems with their home, which rested on a raised foundation. The floors were sagging in certain areas, moisture was accumulating in their crawl space, and odors were starting to form in that area, too. Saber was called to perform the initial inspection of the home and crawl space. It was found that SmartJacks would solve the sagging floor issue and the Sedona dehumidifier along with a drainage system would help with the moisture issues beneath the home. In order to gain access to install SmartJacks and drainage system beneath the home, dirt, and rocks needed to be removed and relocated from the crawl space. The home was on a slight incline, making the space uneven. Once the crawl space area was free from extra dirt and rocks, trenches were dug for the SmartDrain system. The drainage would divert water from the foundation soils away from the home.  Gravel was applied to help filter the groundwater to keep the pipes from clogging. the Sedona dehumidifier was also installed to capture and filter extra moisture in the soils and standing water that may accumulate over time.  After the drainage was covered and dehumidifier installed, a drainage mat was then laid on the dirt floor of the crawl space to further help keep moisture from rising to the surface of the soil and direct it to the drainage system. The crawl space was then encapsulated with CleanSpace to keep the area dry and free from odors and allergens. The SmartJacks and supplemental beams were installed to level and support the sagging floors. At the close of the project, the homeowner was happy that his flooring was supported and reinforced against any further risk of sagging. Future moisture is being avoided by having a clean and dry area underneath his home. Mold and odors also won't have a chance to form after the installation.